PanelzapFor testers

Thanks for testing Panelzap

This is a working build. Please use a test job first, not a live customer quote.

  1. Install (one click, then Allow). You are shown what set-up will add, and it runs when you press the button.
  2. In ServiceM8 open a job → More → Panelzap. It opens on the job hub: which of the eleven stages the job is in, a Do this now list, and five numbered screens across the top (Array, Design, Quote, Compliance, Handover). Clocks and Setup are under More.
  3. Array & layout: tap the panels onto the roof, set the direction and pitch, draw anything on the horizon onto the sunpath chart, press Calculate. Check the MCS estimate against what you would get from OpenSolar, and the parts list against what you would actually order.
  4. Design & checks: it is filled in from the array; add the inverter and cables, press Run checks. The verdict stays at Check until the panel and inverter are named and you tick Checked for this address. If the wind check wants hooks closer than the parts list has them, it says what to type on Array & layout. Try to break it - odd roofs, long cable runs, big arrays.
  5. Quote: check the margin maths and the payment schedule (survey deposit, deposit, stage payment, balance) against how you price, then Write lines to the job and look at the job in ServiceM8. The customer sees a few summary lines; your cost build-up goes on a private note.
  6. Drag the job through the stages on the dispatch board and watch the checklist and badges follow.
  7. Fill in MCS-F06 with a commissioning date and watch the 30-day clock start on Certify and on the Clocks dashboard.

Your first MCS job in Panelzap, start to finish

  1. Enquiry. Make the job, drag it into 01 Enquiry Received. Tick the three checklist items on the job card as you get the details and photos.
  2. Design. Open More → Panelzap and follow Do this now. Lay the panels out (Array & layout), then run the design checks and save the design. Issue the estimate and the MCS Customer Commitment (form F01). Move to 02, then 03 when the survey is booked: the hub tells you to raise the survey deposit as a partial invoice.
  3. Survey. Fill in F02 (survey) and F03 (Technical Supervisor sign-off), attach the structural calc, get F04 (DNO Letter of Authority) signed. Move to 04. If the survey changed the price, change the quote and write the lines again - the survey deposit invoice does not fix the price.
  4. Contract. Contract signed (subject to DNO approval where it applies), deposit invoiced (less the survey deposit) and protected under your scheme, install date pencilled in. Move to 05. From here the quote lines are fixed.
  5. DNO. The design tells you G98 or G99. Fill in F05 with the reasoning, submit, put the reference under References. Move to 06, then 07 when approved, then 08 when the install is booked.
  6. Install. Fit, test, commission. Fill in F06 with the commissioning date. The 30-day certificate clock starts. Move to 09.
  7. Certify. Notify the DNO (G98) or record the decision (G99). Raise the MCS certificate on the MID and put the number under References. Move to 10.
  8. Hand over. Attach the eleven documents, mark the handover pack ready, send it, complete F08. Move to 11. Done.

Every screen has a "How this screen works" box, and the job hub always says what to do next. If it ever does not, that is a bug: tell us.

Tell us

Email info@eastrenewables.co.uk with: what you expected, what happened, a screenshot, and the build number from the bottom of the screen. Anything that made you think "that's not how we do it" is exactly what we want to hear.

Nothing is ever sent to your customers by this add-on; every email template is a draft you send yourself.

Panelzap · build 2026-11-21 15:40Z